मालवीय राष्ट्रीय प्रौद्योगिकी संस्थान जयपुर (राष्ट्रीय महत्व का संस्थान)
Malaviya National Institute of Technology Jaipur (An Institute of National Importance)
Department of Mechanical Engineering
Go Back

45

Journal Publications

8

Conference Publications

1

Research Projects

7

PhD Research Supervised

2

Awards & Honours

Qualifications
  • Ph.D.(Tribology) from MNIT JAIPUR(2017)
    M.Tech.(Production Engineering) from IIT DELHI(2011)
    B.E.(Mechanical Engineering) from JAI NARAIN VYAS UNIVERSITY(2008)
Research Interests

NON CONVENTIONAL MACHINING, Composite Materials, Tribology.

    2024
  • Sonu Saini and Anoj Meena, "Optimizing dental composites with nano limestone and tricalcium particulate fillers: A study on physical and mechanical properties" , Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering (SAGE Publications) Volume :238 / / 2024 DOI: 10.1177/09544089241300043
  • S. Saini, A. Meena et al., "Optimization and Ranking of Dental Restorative Composites by ENTROPY-VIKOR and VIKOR-MATLAB." , Polymers for Advanced Technologies (Wiley) Volume :00 / / 2024 DOI: 10.1002/pat.6526.
  • Rajhans Meena, Abdul Wahab Hashmi, Faiz Iqbal, Shadab Ahmad, Chander Prakash, Jitendra Kumar Katiyar, Harlal Singh Mali and Anoj Meena, "Optimizing surface finish in FDM-printed polycarbonate spur gears through abrasive flow finishing: insights from physics and material science perspectives" , Physica Scripta (IOP Publishing Limited) Volume :99 / / 2024 DOI: 10.1088/1402-4896/ad5a52
  • Sonu Saini , Ramkumar Yadav , Sonam Sonwal , Anoj Meena , Yun Suk Huh , Eugenio Brambilla , Andrei Cristian Ionescu , "Tribological, mechanical, and thermal properties of nano tricalcium phosphate and silver particulates reinforced Bis-GMA/TEGDMA dental resin composites" , Tribology International (Elsevier) Volume :199 / / 2024 DOI: https://doi.org/10.1016/j.triboint.2024.110010
    • 2023
  • Sonu Saini, Anoj Meena, Ramkumar Yadav, Amar Patnaik, "Investigation of physical, mechanical, thermal, and tribological characterization of tricalcium phosphate and zirconia particulate reinforced dental resin composite materials" , Tribology International (Elsevier) Volume :181 / 108322 / 2023 DOI: https://doi.org/10.1016/j.triboint.2023.108322
  • Sonu Saini, Anoj Meena, Ramkumar Yadav, Amar Patnaik, " Fabrication, evaluation and performance ranking of tri-calcium phosphate and silica reinforced dental resin composite materials." , Silicon (Springer ) Volume :XX / / 2023 DOI: https://doi.org/10.1007/s12633-023-02646-6
  • Ramkumar Yadav, Mayank Singh, Anoj Meena, Seul-Yi Lee, Soo-Jin Park, "Selection and ranking of dental restorative composite materials using hybrid Entropy-VIKOR method: An application of MCDM technique" , Journal of the Mechanical Behavior of Biomedical Materials (Science Direct) Volume :147 / / 2023 DOI: https://doi.org/10.1016/j.jmbbm.2023.106103
  • Abdul Wahab Hashmi, Harlal Singh Mali, Anoj Meena, Shadab Ahmad, Yebing Tian , "A novel eco-friendly abrasive media based abrasive flow machining of 3D printed PLA parts using IGWO and ANN" , Rapid Prototyping Journal (Emerald) Volume :xx / / 2023 DOI: https://doi.org/10.1108/RPJ-04-2023-0136
  • Abdul Wahab Hashmi, Harlal Singh Mali, Anoj Meena, Nakul Gupta, Shadab Ahmad, Kuldeep K Saxena, Vinayak Malik, "Abrasive Flow Finishing of Fdm Printed Extrusion Die Insert Pattern Using Novel Afm Fixture with Mandrel Guide" , Surface Review and Letters (World Scientific Publishing Company) Volume :30 / 2350034 / 2023 DOI: https://doi.org/10.1142/S0218625X23500348
  • Rajhans Meena1, Abdul Wahab Hashmi2,3, Faiz Iqbal2, Shadab Ahmad3,4, Chander Prakash5, Jitendra Kumar Katiyar3, Harlal Singh Mali1 and Anoj Meena1, "Influence of fly ash on thermo-mechanical and mechanical behavior of injection molded polypropylene matrix composites" , Chemosphere (Elsevier) Volume :343 / / 2023 DOI: 10.1016/j.chemosphere.2023.140225
    • 2022
  • Ramkumar Yadav, Hae-Hyoung Lee, Anoj Meena and Yugal Kishor Sharma, , "Effect of alumina particulate and E-glass fiber reinforced epoxy composite on erosion wear behavior using Taguchi orthogonal array" , Tribology International (Science Direct) Volume :107860 / 00423-7 / 2022
  • Abdul Wahab Hashmi, Harlal Singh Mali, Anoj Meena, "Improving the surface characteristics of additively manufactured parts: A review" , Materials Today: Proceedings (Elsevier) Volume :0 / 16 / 2022 DOI: https://doi.org/10.1016/j.matpr.2021.04.223
  • Abdul Wahab Hashmi, Harlal Singh Mali, AnojMeena, "A critical review of modeling and simulation techniques for loose abrasive based machining processes" , Materials Today: Proceedings (Elsevier) Volume :56(4) / 2016-2024 / 2022 DOI: https://doi.org/10.1016/j.matpr.2021.11.349
  • Abdul Wahab Hashmi, Harlal Singh Mali, Anoj Meena, Irshad Ahamad Khilji, Mohammad Farukh Hashmi, Siti Nadiah binti Mohd Saffe, "Machine vision for the measurement of machining parameters: A review" , Materials Today: Proceedings (Elsevier) Volume :56(4) / 1939-1946 / 2022 DOI: https://doi.org/10.1016/j.matpr.2021.11.271
  • Abdul Wahab Hashmi, Harlal Singh Mali, Anoj Meena, Ana Pilar Valerga Puerta, Maria Elizete Kunkel, "Surface characteristics improvement methods for metal additively manufactured parts: a review" , Advances in Materials and Processing Technologies (Taylor & Francis) Volume :0 / / 2022 DOI: https://doi.org/10.1080/2374068X.2022.2077535
  • Abdul Wahab Hashmi, Harlal Singh Mali, Anoj Meena, Kuldeep K. Saxena, Ana Pilar Valerga Puerta, Dharam Buddhi , "A newly developed coal-ash-based AFM media characterization for abrasive flow finishing of FDM printed hemispherical ball shape" , International Journal on Interactive Design and Manufacturing (IJIDeM) (Springer) Volume :00 / / 2022 DOI: https://doi.org/10.1007/s12008-022-00982-2
  • Abdul Wahab Hashmi, Harlal Singh Mali, Anoj Meena, Kuldeep K. Saxena, Ana Pilar Valerga Puerta, U. Sathish Rao, Dharam Buddhi, Kahtan A. Mohammed , "Design and modeling of abrasive flow finishing of freeform surfaces of FDM printed femoral component of knee implant pattern" , International Journal on Interactive Design and Manufacturing (IJIDeM) (Springer) Volume :0 / / 2022 DOI: https://doi.org/10.1007/s12008-022-01048-z
  • Abdul Wahab Hashmi, Harlal Singh Mali, Anoj Meena, Mohammad Farukh Hashmi, Neeraj Dhanraj Bokde, "Surface Characteristics Measurement Using Computer Vision: A Review" , Computer Modeling in Engineering & Sciences (Tech Science Press) Volume :135 / 917-1005 / 2022 DOI: https://doi.org/10.32604/cmes.2023.021223
  • Abdul Wahab Hashmi, Harlal Singh Mali, Anoj Meena, Kuldeep K. Saxena, Ana Pilar Valerga Puerta, Chander Prakash, Dharam Buddhi, J. P. Davim, Dalael Saad Abdu, "Understanding the Mechanism of Abrasive-Based Finishing Processes Using Mathematical Modeling and Numerical Simulation" , Metals (MDPI) Volume :12(8) / 1328 / 2022 DOI: https://doi.org/10.3390/met12081328
  • Abdul Wahab Hashmi, Harlal Singh Mali, Anoj Meena, "A comprehensive review on surface quality improvement methods for additively manufactured parts" , Rapid Prototyping Journal (Emerald) Volume :00 / / 2022 DOI: 10.1108/RPJ-06-2021-0133]
  • Ramkumar Yadav,Anoj Meena, "Effect of aluminium oxide,titanium oxide,hydroxyapatite filled dental restorative composite materials on physico-mechanical properties" , ceramics international (Elsevier) Volume :48 / / 2022 DOI: doi.org/10.1016/j.ceramint.2022.03.311
  • Ramkumar Yadav, Anoj Meena, Amar Patnaik, "Tribological behaviour of zinc oxide-hydroxyapatite particulates filled dental restorative composite materials" , Polymer Composites (Wiley) Volume :1-12 / / 2022 DOI: 10.1002/pc.26597
  • Naresh Kaushik, Anoj Meena and Harlal Singh Mali, "Flat end mill machining analysis of processed CrMnFeCoNi high entropy alloys" , Materials and Manufacturing Processes (Taylor and Francis) Volume :00 / / 2022 DOI: 10.1080/10426914.2022.2149785
  • Abdul Wahab Hashmi, Harlal Singh Mali, Anoj Meena, "Experimental investigation of an innovative viscometer for measuring the viscosity of Ferrofluid" , Materials Today: Proceedings (Elsevier) Volume :50 / 2037-2043 / 2022
  • Abdul Wahab Hashmi, Harlal Singh Mali, Anoj Meena, "Design and fabrication of a low-cost one-way abrasive flow finishing set-up using 3D printed parts" , Materials Today: Proceedings (Elsevier) Volume :62 / 7554-7563 / 2022
  • Abdul Wahab Hashmi, Harlal Singh Mali, Anoj Meena, Irshad Ahamad Khilji, Chaitanya Reddy Chilakamarry, "Experimental investigation on magnetorheological finishing process parameters" , Materials Today: Proceedings (Elsevier) Volume :48 / 1892-1898 / 2022
  • Abdul Wahab Hashmi, Harlal Singh Mali, Anoj Meena, "Experimental investigation on abrasive flow Machining (AFM) of FDM printed hollow truncated cone parts" , Materials Today: Proceedings (Elsevier) Volume :56 / 1369-1375 / 2022
  • Abdul Wahab Hashmi, Harlal Singh Mali, Anoj Meena, Irshad Ahamad Khilji, Mohammad Farukh Hashmi, "Artificial intelligence techniques for implementation of intelligent machining" , Materials Today: Proceedings (Elsevier) Volume :56 / 1947-1955 / 2022
  • Yadav R, Meena A, Patnaik A., "Biomaterials for dental composite applications: A comprehensive review of physical, chemical, mechanical, thermal, tribological, and biological properties" , polymers advanced technologies (Wiley) Volume :0 / 1-20 / 2022
  • Ramkumar Yadav, Anoj Meena, "Comparative study of thermo-mechanical and thermogravimetric characterization of hybrid dental restorative composite materials" , Proc. Inst. Mech. Eng. E (SAGE) Volume :000 / 0-00 / 2022
  • RamkumarYadav, AnojMeena, "Comparative investigation of tribological behavior of hybrid dental restorative composite materials" , ceramics international (Elsevier) Volume :48 / 6698-6706 / 2022
    • 2021
  • Naresh kaushik,Anoj Meena, Harlal Singh Mali, "HIGH ENTROPY ALLOY SYNTHESIS,CHARACTERISATION,MANUFACTURING & POTENTIAL APPLICATIONS:a review " , Materials and manufacturing processes (Taylor & Francis) Volume :2006223 / 0-00 / 2021
  • Sonu Saini, Dr. Anoj Meena, "A comparative study of the effect of fillers and monomer on dental restorative material" , MATERIALS TODAY: PROCEEDINGS (Elsevier) Volume :00 / 2214-7853 / 2021
  • Anoj Meena, Diksha Bisht, Ramkumar Yadav, Sonu Saini, Govind Sharan Dangayach, Amar Patnaik,Makkhan Lal Meena1, "Fabrication and characterization of micro alumina zirconia particulate filled dental restorative composite materials" , Polymer Composites (Wiley) Volume :26473 / 1-10 / 2021
  • Ramkumar Yadav, Anoj Meena, "Mechanical and two-body wear characterization of micro-nano ceramic particulate reinforced dental restorative composite materials" , Polymer Composites (Wiley) Volume :0 / 1-16 / 2021
  • Abdul Wahab Hashmi , Harlal Singh Mali , Anoj Meen, "An experimental investigation of viscosity of a newly developed natural polymer-based media for abrasive flow machining (AFM) of 3D printed ABS parts" , Journal of Engineering Research (Academic publication council Kuwait university) Volume :NA / 18 / 2021 DOI: https://doi.org/10.36909/jer.13643
    • 2020
  • Naresh Kaushik,Harry Garg, Anoj Meena, harlal Singh Mali, "Materials and design for drogue detection in air-to-air refueling" , Materials Today: Proceedings (Elsevier) Volume :00 / 123 / 2020
    • 2019
  • Sonu Saini ,Anoj Meena, "enhancement of thermal conductivity of liquid by dispersing ultrafine particles of flyash" , International Journal of Technical Research & Science (Institute of Technical and Scientific Research) Volume :2454-2024 / 7-15 / 2019
  • PriyankaMeena, AnojMeena, MukeshJangir, V.K.Sharma, I.PJain, "Mg-based Nanocomposites for hydrogen storage containing La23Nd8.5Ti1.1Ni33.9Co32.9Al0.65 alloys as additives" , Materials Today: Proceedings (Springer ) Volume :18 / 901-911 / 2019
  • Rashi Meena, Anoj Meena, Priyanka Meena and Amar Patnaik, "Dry sliding wear analysis of aluminium alloy based cylinder liner by using linear reciprocating tribometer" , Materials Research Express (IOP Science) Volume :6 / 4 / 2019
    • 2018
  • Anoj Meena, Harlal Singh Mali, Amar Patnaik and Shiv Ranjan Kumar, "Investigation of wear behavior of nanoalumina and marble dust-reinforced dental composites" , Science and Engineering of Composite Materials (Degruyter) Volume :26 / 84-96 / 2018
    • 2017
  • Sonal Janu, Shiv Ranjan Kumar, Amar Patnaik, Anoj Meena , Manish Godara, "Effect of Adding Nanosilica Particulate Filler on the Wear Behavior of Dental Composite" , Polymer Composites (Wiley) Volume : 39 / 332-341 / 2017 DOI: https://doi.org/10.1002/pc.24436
  • Anoj Meena, Harlal Singh Mali, Amar Patnaik, Shiv Ranjan Kumar, "optimization of physical,mechanical and wear properties of particulate filled dental composite" , international journal of advances in applied science and engineering (ICMDSM) Volume :5 / 0-0 / 2017
  • Anoj Meena, Harlal Singh Mali, Amar Patnaik, Shiv Ranjan Kumar, "Comparative investigation of physical, mechanical and thermomechanical characterization of dental composite filled with nanohydroxyapatite and mineral trioxide aggregate" , e-Polymers (De GRUYTER) Volume :17 / 311-319 / 2017
    • 2016
  • Anoj Meena, Harlal Singh Mali, Amar Patnaik and Shiv Ranjan Kumar, "Effect of adding nanoalumina and marble dust powder on the physical, mechanical, and thermo-mechanical characterization of dental composite" , Polymer Composites (Wiley) Volume :39 / 321-331 / 2016

    2021
  • HARLAL SINGH MALI, ABDUL WAHAB HASHMI,MANISH JANGID, ANOJ MEENA, "EXPERIMENTAL INVESTIGATION on AFF of FDM PRINTED PATTERN for EXTRUSION DIE INSERT" , ALL INDIA MANUFACTURING TECHONOLOGY,DESIGN and RESEARCH CONFERENCE(AIMTDR-2021) by :Springer at PSG COLLEGEOF TECHNOLOGY ,COIMBATORE / / 2021
  • ABDUL WAHAB HASHMI, HARLAL SINGH MALI, ANOJ MEENA, "DESIGN and FABRICATION of a LOW COST ONE -WAY ABRASIVE FLOW FINISHING SETUP USING 3D PRINTED PARTS" , ADVANCEMENT and FUTURISTIC TRENDS in MECHANICAL and MATERIALS ENGINEERING by :Materials Today Proceedings at IIT ROPAR / / 2021
    • 2020
  • Sonu Saini , Dr. Anoj Meena, "A Comparative Study of the Effect of Fillers & Monomer on Dental Restorative Material" , Advances in Materials Processing &Manufacturing Applications(ICADMA 2020) by :MNIT Jaipur at MNIT JAIPUR / / 2020
  • Om Prakash Sharma , Dr. Anoj Meena, "Study of Mechanical Properties and Wear Behaviour of Aluminium 6061 Matrix Composites Reinforced With Hematite and Titania" , Advances in Materials Processing &Manufacturing Applications(ICADMA 2020) by :MNIT Jaipur at MNIT JAIPUR / / 2020
  • Anuraksha dev ,Dr. Anoj Meena, "Mechanical and Tribological Analysis of Ni/TiC Powder Filled ZA-27 Alloy Composites" , Advances in Materials Processing &Manufacturing Applications(ICADMA 2020) by :MNIT Jaipur at MNIT JAIPUR / / 2020
    • 2019
  • Abdul Wahab Hashmi, Deepanshu Singh, Harlal Singh Mali and Anoj Meena, "Modeling and Simulation Techniques for Loose Abrasive Based Machining" , Precision, Meso, Micro and Nano Engineering (COPEN-11) by :IIT INDORE at Indore / / 2019
    • 2017
  • Anoj Meena, Harlal Singh Mali, Amar Patnaik, Shiv Ranjan Kumar, "Optimization of Physical, Mechanical and Thermo-Mechanical Properties of Dental Composite Filled With Nanohydroxyapatite and Mineral Trioxide Aggregate." , International Conference on Advances in Materials, Design, Systems and Manufacturing by :Jaipur Institute of Engineering and Technology, Jaipur at Jaipur / / 2017
  • anoj meena, "Optimization of Physical, Mechanical and Wear Properties of Particulate Filled Dental Composite" , International Conference in Advances in Materials, Design Systems and Manufacturing by :Jec Group of Colleges, Kukus, Jaipur at Jaipur / / 2017

  • Text Book, "Wear analysis of Aluminium alloy filled Cylinder liner " ISBN:978-613-9-46378-7 published by - Lambert Academic Publishing Year: 2019 authors- ANOJ MEENA AND RASHI MEENA

  • Book Chapter, "Investigation of wear characteristics of dental composites filled with nanohydroxyapatite and mineral trioxide aggregate" ISBN:B978-0-08-102194-1.00013-X published by - science direct Year: 2017 authors- AnojMeena,Harlal S.Mali, AmarPatnaik, Shiv Ranjan Kumar
  • Book Chapter, "Quality Improvement Methods for FDM Printed Parts: A Review , Fused Deposition Modeling Based 3D Printing, (Fused Deposition Modeling Based 3D Printing)" ISBN:978-3-030-68023-7 published by - Springer Year: 2021 authors- Hashmi, A.W., Mali, H.S., Meena, A
  • Book Chapter, "Advances in simulation,Product Design and Development" ISBN:978-981-19-4555-7 published by - Springer Year: 2023 authors- Harlal s. mali, naresh kaushik,siddharth k. singh & Anoj Meena
  • Book Chapter, "A critical review of mechanical-based post-processing techniques for additively manufactured parts. Book series: Post Processing Techniques for Additive Manufacturing," ISBN:9781003288619 published by - Taylor and Francis Year: 2023 authors- Abdul Wahab Hashmi, Harlal Singh Mali, Anoj Meena, Shadab Ahmad, Ana Pilar Valerga Puerta, Maria Elizete Kunkel

  • International level Conference on International Confrence on Advanced Manufacturing and Materials Processing at MNIT, jaipur, India from 24-07-2021 to 25-07-2021
  • National level Short Term Course on CAD USING Pro-e/Creo at MNIT, jaipur, India from 05-03-2019 to 09-03-2019
  • National level Workshop on Theory and Practice on Advanced Manufacturing & M echatronics Technologies at MNIT, jaipur, India from 15-05-2018 to 02-07-2018

  • member of IE (India)

    Awarded
  • Naresh Kaushik on Machinability study of CoCrFeMnNi High Entropy Alloys. Year - 2024
  • Mr. Sonu Saini on Fabrication, Characterization & Wear Analysis of Polymer Based Dental Composites Year - 2024
  • Abdul Wahab Hashmi on Improving Surface Characteristics of AM Parts by Abrasive Flow Machine Year - 2023
  • Mr. RamKumar Yadav on Effect of Particulate Filled Dental Restorative Materials on Physico-Mechanical, Thermal & Wear Analysis Year - 2022
    • Ongoing
  • Rajhans Meena on Study of Mechanical and Tribological properties of Additively Manufactured Composite Materials Year - 2023
  • Vipin Kumar Sharma on Fabrication and Characterization of treated natural fiber-based polymer composite Year - 2023
  • Mr. Yugal Kishor Sharma on Performance evaluation of natural fiber reinforced composite Year - 2021

    2023-2024
  • Shashank Singh on Improvisation in misalignment of car Door Year - 2023-2024 (Completed)
    • 2022-2023
  • Vishal Singh on Machinability Analysis of HEA coated brass substrate for micro hole application Year - 2022-2023 (Completed)
    • 2020-2021
  • Vinayak Goswami on Astudy of Corrossion Behaviour of Equiatomic and NON-Equiatomic Cantor Alloy(High Entropy Alloy) Year - 2020-2021 (Completed)
  • Krish Nandu Sharma on Topology Optimization and Static Structural Analysis of Rigid Flange coupling in Siemens NX Year - 2020-2021 (Completed)
    • 2019-2020
  • Yugal Kishor Sharma on Investigation of physical and Mechanical Characterization of Date palm Fibre Epoxy Composite Year - 2019-2020 (Completed)
  • Manish Kumar Jangid on Experimental Investigation on abrasive flow finishing of FDM Printed Extrusion Die Insert Pattern Year - 2019-2020 (Completed)
  • Peeyush Sharma on Mechanical and tribological behaviour of Aluminium Alloy (AA7075) Matrix composite reinforced by Silicon Carbide and flyash Year - 2019-2020 (Completed)
  • Ritesh Ranjan on Experimental Investigation of the properties of sisal/glass fibre hybrid reinforced epoxy Composite Year - 2019-2020 (Completed)
    • 2017-2018
  • Om Prakash Sharma on Study of wear characteristic of hematite and Titania filled Aluminium based composites Year - 2017-2018 (Completed)
  • Diksha Bisht on Parametric Optimization of two body wear behavior of particulate filled dental composite Year - 2017-2018 (Completed)
    • 2016-2017
  • Anuraksha Dev on Design, Mechanical and Tribological Analysis of Ni and TiC based ZA-27 Alloy composites Year - 2016-2017 (Completed)
  • Rashi Meena on Dry Sliding Wear analysis of Aluminium alloy based Cylinder Liner by using Linear reciprocating tribometer Year - 2016-2017 (Completed)
    • 2015-2016
  • Nancy Chaudhary on Experimental investigation for micro electro Discharge Drilling on Co-29Cr-6Mo Alloy using tungsten electrode Year - 2015-2016 (Completed)
    • 2014-2015
  • Sonal on Mechanical and Parametric optimization of two body wear behaviour of particulate filled dental composites Year - 2014-2015 (Completed)

  • Topic: Design and Characterization of aramid and silica brake pad material Year - 2015-2016
    Arun, eslavath, guguloth, joseph (Completed)
  • Topic: Fabrication,Wear and Frictional Analysis of fiber reinforced brake pad material Year - 2014-2015
    Anand kumar, Shubham Prajapat etc. (Completed)
  • Topic: Experimental Study to assess the effect of Different electrodes on machining of Inconel 718 by EDM Year - 2013-2014
    Vinod kumar,radheshyam meena, visheshta meena etc (Completed)

Title Total Outlay
(In Lacs)		 Year Funding Agency Role
Development of Novel Material to Enhance Service Life of Existing Sewage Treatment Tanks 3.002025-2026EVERGREEN ENTERPRISESPI

Title Total Outlay
(In Lacs)		 Year Funding Agency
Summer Internship titled Theory and Practice on Advanced Manufacturing and Mechatronics Technologies0.722018-2018TEQIP and Self Finance by Student

  • library coordinator in MNIT from - 01-01-2018 to Till Date
  • Co-ordinator workshop practice in MNIT JAIPUR from - 25-07-2016 to Till Date
  • Faculty In-charge, Foundry Shop in MNIT JAIPUR from - 06-06-2015 to Till Date
  • Coordinator, Department Industry Institute Interaction in MNIT JAIPUR from - 06-06-2015 to 15-12-2015
  • nodal officer for teqip cell in MNIT JAIPUR from - 10-10-2013 to 31-12-2013
  • co ordinator of fine arts society in MNIT JAIPUR from - 12-09-2013 to 12-09-2014
  • co ordinator sc/ st/obc / pwd development and liaison officer in MNIT JAIPUR from - 23-07-2013 to 23-07-2014

  • Best Research Paper Award for 1st International Conference on Applied Research and Engineering given by Department of Mechanical Engineering, Cape Peninsula University of Technology, Cape Town, Western Year - 2021
  • Certificate of Best Paper Award for Mechanical and Tribological Analysis of Ni/TiC powder filled ZA-27 alloy Composites given by ICADMA 2020 Sponsored by SPARC, MHRD & TEQIP -III, NIT Uttarakhand Year - 2020

SNo. Type Title Event Place Schedule
1TalkEffect of adding nanoalumina and marble dust powder on the physical, mechanical, and thermo-mechanical characterization of dental compositeThe 8th global conference on polymer and composite materialsby online Aug-2021