| 1 |
Dr. Anup Malik |
Manufacturing of Nature Inspired Micro Heat Dissipation Devices using Fabricated Novel Universal Die |
DST-SERB Core Research Grant |
30.59 |
2024-2027 |
| 2 |
Dr. Jinesh Kumar Jain |
Enriched Biomechanical Auxetic Metal-Polymer Implant Fabrication Using Smart Manufacturing Techniques |
RDST |
16.11 |
2024-2027 |
| 3 |
Dr. Tapas Bajpai |
Study of latest technological developments and practices in the life cycle of Unfired Pressure Vessels |
Bureau of Indian Standards |
5.04 |
2024-2024 |
| 4 |
Prof. Amar Patnaik |
Collaboration for Manufacture and Development of Hybrid Armour Material for Ballistic and Blast Protection |
Jindal Stainless Limited, Hisar |
39.60 |
2024-2025 |
| 5 |
Prof. Amar Patnaik |
Development and characterization of high-temperature wear and corrosion resistance high entropy alloy (HEA) for airborne parts and turbine engine blade |
SPARC-MHRD Govt. of India |
48.00 |
2023-2025 |
| 6 |
Dr. Rajeev Agrawal |
Development of Artificial intelligence enabled sustainable health care waste management system in India |
Indian Council of Social Science Research |
12.00 |
2023-2025 |
| 7 |
Dr. M. L. Meena |
Ergonomic Assessment and Intervention Design for the Improvement of Occupational Health of Rural Handicraft Workers |
The Institute of Engineer(s) India, Kolkata |
0.92 |
2023-2024 |
| 8 |
Dr. M. L. Meena |
A Study of Ground Water Level and Increasing Borewell Water Level of UBA Villages in Jaipur District |
WSSO, Govt. of Rajasthan |
3.67 |
2023-2025 |
| 9 |
Dr. Manjinder Singh |
Design and development of loop heat pipe to enhance energy efficiency via waste heat recovery |
LAM Research |
41.00 |
2023-2026 |
| 10 |
Dr. Manjinder Singh |
Diode heat Pipe |
ISRO |
1.00 |
2023-2023 |
| 11 |
Dr. Amit Arora |
Thermo-mechanical characterization of lac blends and development of equipment for partial mechanization of bangle making process |
District Industries and Commerce Centre - Jaipur, Government of Rajasthan |
5.00 |
2023-2024 |
| 12 |
Prof. Harlal Singh Mali |
Optimization study for Vacuum Assisted Compression Molding and Vacuum Assisted Resin Transfer Molding Process for Contoured Composites. |
DMSRDE, DRDO |
72.66 |
2023-2025 |
| 13 |
Prof. Amar Patnaik |
Development of ultra high sub micron Ievel measurement facility for coefficient of thermal expansion lbr dimensionalty stable composite structures |
ISRO Regional Academic Center for Space |
20.00 |
2023-2025 |
| 14 |
Prof. Amar Patnaik |
Design and Demonstration of Empty and Foam Filled Honeycomb Structures for Energy Absorption During Crash/Impact |
ISRO Regional Academic Center for Space |
17.90 |
2023-2025 |
| 15 |
Dr. M. L. Meena |
Measurement of Musculoskeletal Disorders among Carpet Weavers and Ergonomic Intervention of Carpet Weaving Hand Tools |
SERB, DST New Delhi |
46.69 |
2023-2026 |
| 16 |
Dr. Gunjan Soni |
Collaborative Research Based Education for Optimized Performance of Wind Farms |
The Research Counsel of Norway |
40.00 |
2023-2028 |
| 17 |
Prof. Harlal Singh Mali |
Feasibility Study on Internal Finishing of Turbochargers through One Way Abrasive Flow Machine |
Spark Minda Group |
2.40 |
2023-2024 |
| 18 |
Prof. Amar Patnaik |
Hybrid Jute Composite Modification and subsequent Development of Porta Cabin |
National Jute Board, Govt. of India |
37.76 |
2022-2023 |
| 19 |
Prof. Amar Patnaik |
Development of Ceramic and UHMWPE Textile Based Hybrid Polymer Composite Armor |
Ministry of Textiles, Govt. of India |
363.36 |
2022-2025 |
| 20 |
Prof. Amar Patnaik |
Development of E-glass/Carbon textile reinforced hybrid polymer composites for wind turbine Blade application |
Ministry of Textiles, Govt. of India |
41.40 |
2022-2025 |
| 21 |
Dr. Ram Dayal |
Development of 3D Computational Evaporator (Chiller) & Condenser |
UFI Innovation Center India Pvt. Ltd. |
22.65 |
2022-2024 |
| 22 |
Dr. Gunjan Soni |
A Risk Assessment Index for Prediction and Prevention of Silicosis among Stone Workers in Rajasthan |
Directorate of Specially Abled Person, Government of Rajasthan |
7.13 |
2022-2024 |
| 23 |
Dr. Gunjan Soni |
Role of Socioeconomic and Technological Factors in Adoption of Industry 4.0 Technologies in Indian Agri-fresh Supply Chains (AFSC) |
ICSSR |
8.00 |
2022-2024 |
| 24 |
Dr. Gunjan Soni |
Global Collaborative Research Based Education for Enhancing Performance of Wind Farms (EduWind), UTF-2021/10169 |
The Norwegian Directorate for Higher Education and Skills (HK-dir) |
35.00 |
2022-2026 |
| 25 |
Prof. Himanshu Chaudhary |
Fatigue Testing Facilitiy development |
FIST, DST, New Delhi |
94.00 |
2022-2027 |
| 26 |
Dr. Rajeev Agrawal |
Design Expertise Manufacturing MSME Sector (MSME- Innovative- Design ) |
MSME ,New Delhi |
11.40 |
2022-2023 |
| 27 |
Prof. Jyotirmay Mathur |
Applied Research for Sustainable Energy in Buildings |
UGC, New Delhi |
157.63 |
2020-2020 |
| 28 |
Prof. Jyotirmay Mathur |
Award of Renewable Energy Chair under HRD scheme of the Ministry |
Ministry of New and Renewable Energy (GoI) |
150.00 |
2020-2018 |
| 29 |
Prof. Harlal Singh Mali |
Remedial Orthosis for CTEV Clubfoot (BIRAC/SIIC0107/ BIG-14/19) |
BIRAC, DBT, GoI |
48.50 |
2020-2022 |
| 30 |
Prof. Jyotirmay Mathur |
State Energy Efficiency Research and Outreach Programme |
RRECL |
25.00 |
2020-2022 |
| 31 |
Dr. Amit Kumar Singh |
Upcycled Plastic Prosthetics (UPP) Frontiers Follow On Grant |
Royal Academy of Engineering, UK |
49.00 |
2020-2022 |
| 32 |
Dr. Dinesh Kumar Rathore |
Evaluation of interleaving and matrix modification techniques on interlaminar fracture toughness and fatigue behaviour of carbon fiber/epoxy composites |
SERB |
18.30 |
2020-2023 |
| 33 |
Prof. Amar Patnaik |
Optimization of power consumed by Airlift Pump TAR/2020/000217 |
SERB-TARE, New delhi |
18.30 |
2020-2023 |
| 34 |
Prof. Harlal Singh Mali |
Development of Vacuumized Abrasive Finishing Setup for finishing complicated surfaces using novel abrasive media |
NPIU |
11.38 |
2019-2020 |
| 35 |
Dr. Anoj Meena |
Tribological Performance characteristics of dental composite materials |
MHRD |
12.35 |
2019-2020 |
| 36 |
Dr. Pankaj Kumar Gupta |
Development and Parametric Investigations on Ultra-Sonic assisted Electro Chemical Discharge Machining (US-ECDM) |
NPIU-TEQIP-III |
3.00 |
2019-2019 |
| 37 |
Dr. Anup Malik |
Fabrication of micro-features using modular micro-ECSM in fibre reinforced polymer composite |
TEQIP-III |
3.98 |
2019-2020 |
| 38 |
Dr. Naresh Kumar Raghuwanshi |
Analysis and control of noise pollution in hospitals |
National Project Implementation Unit, MHRD Govt. of India |
21.83 |
2019-2020 |
| 39 |
Dr. Tapas Bajpai |
Thermo-mechanical analyses and microstructural characterization of aluminium alloys plates in multi-pass GMA welding |
TEQIP-III |
3.00 |
2019-2020 |
| 40 |
Prof. Amar Patnaik |
Modeling a combinatorial approach for design of steel with ultra-high strength and toughness Scheme for Promotion of Academic and Research Collaboration |
SPARC MHRD New Delhi. |
70.20 |
2019-2023 |
| 41 |
Prof. Amar Patnaik |
Development of Ceramic Armour Panels To Stanag 4569 Level-4 For Futuristic Infantry Combat Vehicle (FICV) |
Ordnance Development Centre , Ordnance Factory Medak, Yeddumalaram |
18.80 |
2019-2023 |
| 42 |
Dr. Rajeev Agrawal |
Exploration of sustainable manufacturing in Indian manufacturing industries |
TEQIP-3 |
3.95 |
2019-2020 |
| 43 |
Prof. Harlal Singh Mali |
Development and Characterization of differently woven Carbon-Kevlar hybrid composite with their modeling and analysis |
DRDO New Delhi |
37.33 |
2019-2022 |
| 44 |
Prof. Harlal Singh Mali |
Design Tinkering and PoC for AU-2019 Innovative Student Projects |
PMG Integrated Communications Private Limited for Autodesk Inc. |
2.00 |
2019-2021 |
| 45 |
Prof. Harlal Singh Mali |
COMPUTER AIDED DESIGN AND DEVELOPMENT OF CLUB FOOT AND ANKLE FOOT ORTHOSIS |
Autodesk India Pvt Ltd |
3.76 |
2018-2019 |
| 46 |
Prof. Harlal Singh Mali |
All Terrain Vehicle for SAE BAJA 2019 |
Honda Cars India Ltd. |
2.00 |
2018-2019 |
| 47 |
Prof. Harlal Singh Mali |
Fabrication and Finishing of Micro-Channels for Micro-Heat Exchangers and Micro-Reactors |
DST (SERB) |
42.28 |
2018-2022 |
| 48 |
Dr. Amit Kumar Singh |
Accessible Recycle Material (ARM) Prosthetics |
GCRF |
25.00 |
2018-2019 |
| 49 |
Prof. Jyotirmay Mathur |
IEQ Standard Implementation Methodology |
Indian Society of Heating Refrigerating and Air Conditioning Engineers (ISHRAE) |
14.25 |
2018-2019 |
| 50 |
Dr. Dinesh Kumar |
Nanostructures (Carbon-Nano Tube (CNT)) Reinforced Nanocomposite based Heat Shield System for Spacecraft Applications |
ISRO |
20.20 |
2017-2019 |
| 51 |
Prof. Jyotirmay Mathur |
Residential Building Energy Demand Reduction in India (RESIDE) |
Department of Science and Technology (DST) |
119.68 |
2017-2020 |
| 52 |
Prof. Harlal Singh Mali |
3D Printing of Jaipur Foot. |
Autodesk India Pvt. Ltd |
1.29 |
2017-2018 |
| 53 |
Prof. Jyotirmay Mathur |
UK India Clean Energy Research Institute (UKICERI) |
Department of Science and Technology, DST |
102.02 |
2017-2020 |
| 54 |
Dr. Amit Kumar Singh |
Effective Product Development Through Integration of Reverse Engineering and Additive Manufacturing |
DST |
25.00 |
2016-2016 |
| 55 |
Prof. Amar Patnaik |
Technology Business Incubator |
TBI DST New Delhi |
497.00 |
2016-2022 |
| 56 |
Prof. Amar Patnaik |
Development of Marble dust Filled Fibre Reinforced Polymer Composite for Wind Turbine Blade |
State S&T Councils Department of Science and Technology |
55.73 |
2016-2019 |
| 57 |
Prof. Jyotirmay Mathur |
Development of Fully Automatic Double- Axis Tracking of Scheffler Dish System for Enhanced Performance |
Ministry of New and Renewable Energy (GoI) |
37.07 |
2016-2017 |
| 58 |
Prof. Amar Patnaik |
Development of Ti-Al-N based coating on Al-alloy for application in hydroturbine blades |
CSIR |
19.00 |
2016-2019 |
| 59 |
Prof. Dilip Sharma |
Design and Development of Solar Assisted Rapid Milk Cooler |
State S T Council (SSTD) Programme DST Delhi |
31.82 |
2015-2018 |
| 60 |
Prof. Amar Patnaik |
Economic production of iron through direct reduction of Mill Scale by low grade coal of Rajasthan (PI) |
Ministry of Steel, New Delhi |
166.00 |
2015-2021 |
| 61 |
Prof. Jyotirmay Mathur |
Reclassification of Climatic Zones for Indian Cities and Updating Weather Data Book with E-publishing |
Indian Society of Heating Refrigerating and Air Conditioning Engineers (ISHRAE) |
5.82 |
2015-2016 |
| 62 |
Prof. Harlal Singh Mali |
IRES US India Collaborative Research in Mechanical Biomedical and Materials Science Engineering for Undergraduates |
NSF USA Award Number 1358157 and 1358004 with the OSU and CSU PIs |
151.77 |
2014-2017 |
| 63 |
Prof. Harlal Singh Mali |
Gainful utilization of stone waste in the state of Rajasthan- CDOS-Stone Chair |
Centre for Development of Stones, Jaipur |
100.00 |
2014-2021 |
| 64 |
Prof. Amar Patnaik |
Utilization of marble dust and slurry in Rajasthan |
Centre for Development of Stone, Jaipur |
100.00 |
2013-2021 |
| 65 |
Prof. Harlal Singh Mali |
Design and Development of low cost one way Abrasive Flow Machine (AFM) utilizing pulp and fullers earth based media |
DST(SERB) |
13.14 |
2013-2016 |
| 66 |
Prof. Jyotirmay Mathur |
Indo-US Indian Joint Centre for Building Energy Research and Development |
US India Science and Technology Forum and US Department of Energy |
593.77 |
2012-2017 |
| 67 |
Prof. Jyotirmay Mathur |
Capacity Building in Renewable Energy |
Ministry of New and Renewable Energy (GoI) |
50.00 |
2012-2016 |
| 68 |
Prof. Jyotirmay Mathur |
Setting up Energy Resource Centre |
Rajasthan Renewable Energy Corporation Limited (GoR) |
20.00 |
2012-2017 |
| 69 |
Prof. S. L. Soni (On Deputation) |
Studies of Thumba (CitrullusColocynthis) Seed Oil on Engine Performance, Combustion and Exhaust Emission Characteristics |
Department of Science and Technology Delhi |
34.70 |
2012-2015 |
| 70 |
Prof. G. D. Agarwal |
Experimental Study of Flat Plate Solar Collector Using Nano-Fluids |
DST |
12.00 |
2012-2015 |
| 71 |
Prof. G. D. Agarwal |
Development of a Solar Energy based Membrane Distillation System for Rural Drinking Water applications in Rajasthan |
PHED |
11.00 |
2012-2015 |
| 72 |
Prof. Amar Patnaik |
Thermo-mechanical and Fracture Analysis of Hybrid Polymer Matrix Composites |
UKIERI – UK |
4.00 |
2012-2013 |
| 73 |
Prof. Dilip Sharma |
Development of SVO operated micro Trigeneration system for rural applications |
Department of Science and Technology, Rajasthan |
3.70 |
2011-2014 |
| 74 |
Prof. Jyotirmay Mathur |
Review and Supervision of Installation of cool roof experiment at Pantnagar and Naninital |
IIIT, Hyderabad |
1.44 |
2011-2013 |
| 75 |
Prof. Murari Lal Mittal |
Development of a Multi- Agent based System for Dynamic Multi-project Scheduling |
DST Government of India |
6.00 |
2010-2012 |
| 76 |
Prof. Rakesh Jain |
Development of Multi-agent System for dynamic Multiproject scheduling |
DST |
6.00 |
2010-2012 |
| 77 |
Prof. Dilip Sharma |
Design, Development and fabrication of a stove operated on Jatropa oil |
Social Policy Research Institute, Jaipur |
0.50 |
2009-2009 |
| 78 |
Prof. Amar Patnaik |
Development of Short fiber Reinforced Hybrid Composites and Study of their Erosion Characteristics |
DST, India |
1.80 |
2008-2011 |
| 79 |
Dr. Dinesh Kumar |
Experimental Investigation of Failure and Stability of Laminated Composite Plates (Carried out BITS Pilani as the Co-PI |
CSIR New Dehli |
6.00 |
2008-2011 |
| 80 |
Dr. Dinesh Kumar |
Failure and Stability Analysis of Laminated Composite Plates with Cutouts (Carried out at BITS Pilani as Co-PI) |
K K Birla Academy New Dehli |
4.50 |
2007-2010 |
| 81 |
Prof. Dilip Sharma |
Design and Development of Low Built Wider width Handloom Ideal for weaving 90’’ wide fabric |
Ministry of Textiles |
3.90 |
2005-2009 |
| 82 |
Prof. G. D. Agarwal |
Development of a hybrid waste disposal system through recycling and sanitary landfilling for solid waste of the institute campus |
MHRD |
9.00 |
2003-2005 |
| 83 |
Prof. G. S. Dangayach |
Indentification of critical success factor & Implementation methodology for advance manufacturing technologies |
DST (Govt. of India) |
5.11 |
2001-2004 |
| 84 |
Prof. Dilip Sharma |
Design and development of safe feeding mechanism for Fodder machines |
Department of Science and Technology Rajasthan |
0.70 |
2000-2001 |
| 85 |
Prof. Dilip Sharma |
Creation of Facilities for Evaluation of Alternate Fuels for Engines and Ambient/exhaust Pollution |
Ministry of Human Resource Development under MODROB |
10.00 |
2000-2001 |
